Skip to content

Use the Local Ranking map dashboard ​

Added 2026-09-27 (GeoGrid Product); joined into one page on 3 October 2026. The single-search rank check and the Performance tab that used to live in Google Profile no longer exist: everything about ranking, keywords and Google's search figures is on this page. Do not tell a customer to look for ranking inside Google Profile.

Local Ranking is its own sidebar item (desktop) / bottom-bar item (mobile). It shows the keywords the business has chosen; see Set up Revieme for how the first answer is given.

What the dashboard shows ​

Each confirmed keyword gets its own card with:

  • a map of points around the business, each dot showing the business's Google Maps rank for that keyword searched from that exact place (1 is best; 20+ means it did not appear in the top 20 there — this is never shown or treated as rank 0);
  • Top-3 share — the share of checked places where the business is in the top 3;
  • Position (since 14 October 2026 the single label for this figure everywhere; it replaced "Average position", "Position across your area" and "Rank") — the business's average place across the area, shown only when the business appears at half of the points or more (13 of 25), and then averaged only over the points where it appears, with "found at N of 25 points" beside it. Below that it says "Not in the top 20 across most of your area" with how many points it was found at, and when it was found at none it says "Not in the top 20". Revieme never shows a position it did not measure, and a point where the business does not appear is never counted as a rank;
  • a ! on a place means Revieme or the provider could not check it that time — it is left blank, never guessed;
  • tapping a dot shows who ranks at that place — the other real businesses Google returned there. If Google returned nothing for that place it says "No results at this place"; if it returned the full top 20 without yours it says "You're not in the top 20 at this place", and if it returned fewer than 20 businesses and not yours it says "Google showed N businesses here; you're not among them";
  • a competitor leaderboard below the maps, across every point in that scan;
  • a Weekly/Monthly switch, and Baseline, Week 1, Week 2, Week 3… labels for picking which scan to view.

The PDF report. Download PDF puts each chosen keyword on its own page with the real street map, the same numbered, coloured places as on the page, the dashed ring for the area, a legend, and "© OpenStreetMap contributors" under the map. If the street map cannot be loaded at that moment, the page shows the same places on a plain grid with one line saying so; the report is still produced. It shows the scans you chose and does not start a new scan.

A keyword that contains the business's own name is tagged "Includes your business name" and is left out of the summary averages, because searching for your own name says little about being found by new customers. A summary strip at the top also shows Position per keyword for the other confirmed keywords, current Google rating, total reviews and new reviews.

How movement is worded (the same rule as the weekly WhatsApp sentences). Movement compares the latest scan with the first one. The Position decides first: 1.0 place or more better is "places better", 0.3 to 0.9 better is "a small step better", within 0.2 is "Holding steady", and 0.3 or more worse is "places worse". If the business now shows up at clearly more (or fewer) points across the area (a fifth of the points or more) and the Position does not already say the same, that is said instead: "You show up in more places across your area" (or fewer). The competitor table keeps its own Rank column for each competitor. On the chart a better position is drawn higher: the best position is at the top, and the caption keeps "1 is best".

How often it checks ​

Revieme checks automatically on its own weekly cadence — the customer never has to trigger this. In addition, a paying business (any paid plan: monthly, quarterly, six-month or annual) has 2 manual, out-of-cycle scans in every calendar month; a business on the free plan or in its trial keeps its single manual scan per period. One refresh icon on the Local Ranking page scans all the business's keywords at once:

  • before a manual scan runs, the app asks in plain words, for example: "You have 2 manual scans each month. This is scan 1 of 2 for November. After it you will have 1 left until 1 December. Your automatic weekly scans keep running and do not use these. Run the scan now?" with the buttons Run scan and Not now. For the second one it says "This is your last manual scan for November" and gives the date the next one is available. Nothing is used up until Run scan is pressed;
  • the weekly automatic scans never use up these manual scans;
  • a small line beside the icon says how many are left this month (for example "1 of 2 manual scans left in November"); once both are used it reads All 2 manual scans used for November · next available 1 December, and each new calendar month starts with the full 2 (by the business's own time zone);
  • if you use Scan "<keyword>" now while a scan for that keyword is already running (for example the automatic first scan), nothing new starts and your manual scan is not used up;
  • if a manual scan ends without producing a map (it failed), your manual scan is given back automatically; if it delivers a partial map (some places could not be measured), it still counts as used;
  • a map that cannot finish is ended automatically: places the provider cannot measure are shown as not found, and a scan that stays unfinished for too long is closed out instead of showing Building your map… forever;
  • this is a real, provider-billed check — never suggest using it merely to "double check" or "make the number look current" for a support conversation.

Scans only while the business is open (live since 3 October 2026). Rankings differ when a business is closed, so Revieme starts a scan only while the business is open in its own time zone, using the opening hours (and holiday hours) on its Google profile. It checks only whether the business is open or closed, never the time of day, so a scan can run at night while the business is open. A business with no opening hours set is treated as open 24 hours; a day with no hours (for example Sunday) is skipped. When a scan is due while the business is closed, it is moved to one planned time inside the next opening, not retried again and again. Before 3 October 2026, scans started at any time. Customers are encouraged to keep their opening hours up to date on their Google profile.

Scan "<keyword>" now warns instead of refusing (live since 3 October 2026). If the business is closed when the button is pressed, the app says it is not the best time and offers two choices: Schedule for next opening (the check runs at a planned time inside the next opening, and the period's manual scan is used when it runs) or Run it now anyway (it runs immediately and uses the period's manual scan as normal; that check is not counted as an in-hours measurement). Nothing is used up by the warning itself. If the opening hours cannot be read, the same two choices appear.

If a keyword was just added or edited, its card says it will be measured on the next scheduled scan (or shows the days remaining) rather than showing stale data from a previous, different keyword.

Choosing keywords ​

At the top of the Local Ranking page, a Choose what customers search for card appears when a keyword still needs choosing: a keyword Revieme suggested from the Google profile that has not been approved (Use this approves it as it is; the phrase can be edited first), or no main keyword yet. Once a main keyword is tracked, Add a second keyword lets the customer add an optional second one. A keyword is written as "service in area" (for example "photo studio in Lekki"); Revieme splits it at the last " in " and shows the two parts back before saving. Saving only records the choice; it does not start a scan by itself.

Changing a keyword, and keyword history ​

Each keyword has a pencil next to it. Primary and secondary are counted separately. Before a keyword's first scan it can be corrected freely. After the first scan the customer gets one free change (the keyword given during onboarding does not count as a change): it does not need any waiting, but once it is used the new keyword is locked for 30 days, and every later change is again one per 30 days. While a slot is locked the editor says the date it opens again.

  • The old keyword is never deleted. It keeps every scan and its own starting point, and appears under Your keyword history (the last 3 past keywords, then See all past keywords) as, for example, "tracked 27 Sept to 12 Nov: #4 to #2, stopped when you changed keyword".
  • The new keyword starts its own history and its own first scan. Two different keywords are never compared with each other, and the progress chart draws one line per keyword with a "keyword changed" marker where the old one stopped.
  • Spelling-only edits (same words after ignoring capitals, accents, punctuation and extra spaces) are saved in place, keep the history and never count as a change. Correcting an answer before its first scan does not count either. This also holds for a keyword the customer typed during onboarding: once it has been scanned, different words are a change like any other.
  • Revieme staff can change any keyword at any time: inside a lock they write a reason of at least 10 characters, which is recorded in the audit log. A staff change never uses the customer's free change and never starts or resets the customer's 30 days. An agency admin acting for a business has the customer's rules, not staff's. A customer sees no override.
  • Every change to different words after a scan, free or not, ends the old keyword and starts a new one: a new history, its own first scan, and the old scans stay under the old words.
  • Changing a keyword leads to one new baseline scan for the new keyword (a real, provider-billed check), which is why it is limited.

Search activity on this page ​

At the bottom of the page: Search & discovery activity (last 30, 60 or 90 days) and Search keyword impressions (last 3 or 6 months; the top 10 first, See more opens the full paged, searchable list). These are the figures Google returns for the listing; a value Google reports only as below a threshold is shown as that threshold (for example < 15), never as an invented number. They are not a local-rank score. Home shows the top 5 impressions with a link here.

Weekly update message ​

Not live yet (the app side is built; it is waiting for the message-sending workflows to go live, not for a release): each business will receive one WhatsApp message a week with how its local ranking has moved since its starting point and, if there is something left to fix on its Google profile, the top two or three things (left out when the profile is complete). It arrives 7 days after the business started, then every 7 days on the business's own cycle, only between about 08:00 and 20:00 local time, and it uses a ranking check made while the business was open. Until those workflows go live, no weekly update message is sent. Do not promise a day or hour to a customer; the cycle follows when each business started.

Sharing a report ​

Copy link creates (or reuses) one evergreen link per business — the same link every time, always showing the latest data, and the customer can browse any past week or month from it. It needs no login. Confirm to the customer that clicking it shows "Link copied", and that the link is safe to send to anyone (it is rate-limited and excluded from search engines).

Export PDF lets the customer choose a week or month — either one choice for the whole page, or a different one per keyword — and produces a snapshot frozen to that period. It never auto-refreshes after export.


Back to Help Centre · Troubleshooting